Table of Contents
Advertisement
<Sysname> system-view
[Sysname] interface gigabitethernet 0/0
[Sysname-GigabitEthernet0/0] portal nas-id 0002053110000460
portal nas-id-profile
Syntax
portal nas-id-profile profile-name
undo portal nas-id-profile
View
Interface
Default level
2: System level
Parameters
profile-name: Name of the profile that defines the binding relationship between VLANs and NAS IDs.
The profile can be configured by using the aaa nas-id profile command.
Description
Use the portal nas-id-profile command to specify a NAS ID profile for the interface.
Use the undo portal nas-id-profile command to cancel the configuration.
By default, an interface is not specified with any NAS ID profile.
If an interface is specified with a NAS ID profile, the interface prefers to use the binding defined in the
profile. If no NAS ID profile is specified for an interface or no matching binding is found in the specified
profile:
If a NAS ID is configured using the portal nas-id command, the device uses the configured NAS ID
•
as that of the interface.
If the interface has no NAS ID configured, the device uses the device name as the interface NAS ID.
•
Examples
# Specify NAS ID profile aaa for VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] portal nas-id-profile aaa
portal nas-ip
Syntax
portal nas-ip ip-address
undo portal nas-ip
View
Interface view
Default level
2: System level
47
Advertisement
Table of Contents
