Table of Contents
Advertisement
Default level
2: System level
Parameters
vd-name vd-name: Displays the relationship table entries of the specified virtual device. The vd-name
argument specifies the name of a virtual device. It is a case-insensitive string of 1 to 20 characters, which
can be numerals, letters and underlines.
Description
Use the display session relation-table command to display relationship table entries.
With no virtual device specified, the command displays the relationship table entries of all virtual
devices.
Examples
# Displays all relationship table entries.
<Sysname> display session relation-table
Local IP/Port
192.168.1.22/99
APP:QQ
Local IP/Port
192.168.1.100/99
APP:FTP
Total find:
Table 7 Output description
Field
Local IP/Port
Global IP/Port
MatchMode
App
Pro
TTL
AllowConn
Total find
display session statistics
Syntax
display session statistics [ vd-name vd-name ]
Global IP/Port
10.153.2.22/99
Pro:UDP
TTL:2000s
Global IP/Port
10.153.2.100/99
Pro:TCP
TTL:2000s
2
Description
IP address/port number of the inside network
IP address/ port number of the outside network
Match mode from session table to relationship table, including Local, Global,
and Either.
•
•
•
Application layer protocol, FTP, MSN, or QQ
Transport layer protocol, TCP, or UDP
Remaining lifetime of the relationship table entry, in seconds.
Number of sessions allowed by the relationship table entry
Total number of found relationship table entries
MatchMode
Local
AllowConn:10
MatchMode
Local
AllowConn:10
Local: Indicates that the source IP address/source port of a new session are
matched against Local IP/Port in the relation table.
Global: Indicates that the destination IP address/destination port of a new
session are matched against Global IP/Port in the relation table.
Either: Indicates that the IP/port of a new session are matched against Local
IP/Port or Global IP/Port in the relation table.
18
Advertisement
Table of Contents
