Table of Contents
Advertisement
Parameters
step-value: ACL rule numbering step, in the range of 1 to 20.
Description
Use the step command to set a rule numbering step for an ACL. The rule numbering step sets the
increment by which the system numbers rules automatically. For example, the default ACL rule numbering
step is 5. If you do not assign IDs to rules you are creating, they are numbered 0, 5, 10, 15, and so on.
The wider the numbering step, the more rules you can insert between two rules. Whenever the step
changes, the rules are renumbered, starting from 0. For example, if there are five rules numbered 5, 10,
13, 15, and 20, changing the step from 5 to 2 causes the rules to be renumbered 0, 2, 4, 6 and 8.
Use the undo step command to restore the default.
The default rule numbering step is 5. After you restore the default numbering step by the undo step
command, the rules are renumbered in steps of 5.
Related commands: display acl.
Examples
# Set the rule numbering step to 2 for IPv4 basic ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] step 2
time-range
Syntax
time-range time-range-name { start-time to end-time days [ from time1 date1 ] [ to time2 date2 ] | from
time1 date1 [ to time2 date2 ] | to time2 date2 }
undo time-range time-range-name [ start-time to end-time days [ from time1 date1 ] [ to time2 date2 ]
| from time1 date1 [ to time2 date2 ] | to time2 date2 ]
View
System view
Default level
2: System level
Parameters
time-range-name: Specifies a time range name. The name is a case-insensitive string of 1 to 32
characters. It must start with an English letter and to avoid confusion, it cannot be all.
start-time to end-time: Specifies a periodic statement. Both start-time and end-time are in hh:mm format
(24-hour clock), and each value is in the range of 00:00 to 23:59. The end time must be greater than the
start time.
days: Specifies the day or days of the week (in words or digits) on which the periodic statement is valid.
If you specify multiple values, separate each value with a space, and be sure that they do not overlap.
These values can take one of the following forms:
A digit in the range of 0 to 6, respectively for Sunday, Monday, Tuesday, Wednesday, Thursday,
•
Friday, and Saturday.
A day of a week in abbreviated words, sun, mon, tue, wed, thu, fri, and sat.
•
working-day for Monday through Friday.
•
14
Advertisement
Table of Contents
