Table of Contents
Advertisement
View
System view
Default level
2: System level
Parameters
max-number: Maximum number of online portal users allowed in the system.
Description
Use the portal max-user command to set the maximum number of online portal users allowed in the
system.
Use the undo portal max-user command to restore the default.
By default, the maximum number of portal users allowed on the device is 512.
If the maximum number of portal users specified in the command is less than that of the current online
portal users, the command can be executed successfully and does not impact the online portal users, but
the system does not allow new portal users to log in until the number drops down below the limit.
Examples
# Set the maximum number of portal users allowed in the system to 100.
<Sysname> system-view
[Sysname] portal max-user 100
portal nas-id
Syntax
portal nas-id nas-identifier
undo portal nas-id
View
Interface view
Default level
2: System level
Parameters
nas-identifier: NAS ID, a case-sensitive string of 1 to 16 characters. This value is used as the value of the
NAS-Identifier attribute in the RADIUS request to be sent to the RADIUS server when a portal user logs on
from the interface.
Description
Use the portal nas-id command to specify the NAS ID value carried in a RADIUS request.
Use the undo portal nas-id command to restore the default.
By default, the device name specified by the sysname command is used as the NAS ID in a RADIUS
request. For information about the sysname command, see Getting Started Command Reference.
Examples
# Specify the NAS ID value carried in a RADIUS request sent by GigabitEthernet 0/0 as
00020531 10000460.
46
Advertisement
Table of Contents
