Table of Contents
Advertisement
display portal interface
Syntax
display portal interface interface-type interface-number
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display portal interface command to display the portal configuration of an interface.
Examples
# Display the portal configuration of interface GigabitEthernet 0/0.
<Sysname> display portal interface gigabitethernet0/0
Interface portal configuration:
GigabitEthernet0/0: Portal running
Portal server: servername
Authentication type: Direct
Portal backup-group: 1
Authentication domain: my-domain
Authentication network:
address : 0.0.0.0
Table 14 Output description
Field
Interface portal configuration
GigabitEthernet0/0
Portal server
Authentication type
Portal backup-group
Authentication domain
Authentication network
address
mask
mask : 0.0.0.0
Description
Portal configuration on the interface
Status of the portal feature on the interface, disabled, enabled, or running.
Portal server referenced by the interface
Authentication mode enabled on the interface
Number of the portal group to which the interface belongs.
If the interface does not belong to any portal group, None will be
displayed.
Mandatory authentication domain of the interface
Information of the portal authentication subnet
IP address of the portal authentication subnet
Subnet mask of the IP address of the portal authentication subnet
37
Advertisement
Table of Contents
