Table of Contents
Advertisement
The Double-Traverse Method - MCF (cont.)
5.4b
5. Locate the magnetic blocks at least 4 in. away from the transducer blocks. This will ensure that there is enough
clearance to mount the transducers in the blocks. Move the adjustable magnetic block in the same manner as the
transducer block.
6. Position the clamping fixture along the horizontal plane of the pipe. If the pipe is horizontal, do not place the
fixture on the top or bottom of the pipe.
7. Turn the switches on each magnet to the ON position.
8. If provided, secure the safety chain. The safety chain prevents the fixture from falling of the pipe in the event the
magnet releases.
9. Proceed to Mounting Transducers into the MCF
32
At least 4"
S
S
S
on page 37.
C-PT Ultrasonic Flow Transducer Installation Guide
Top View
Advertisement
Table of Contents
