Table of Contents
Advertisement
5.3c Mounting Transducers into the GCF (cont.)
WARNING! Before performing the next step make sure the power to the flowmeter electronics is
disconnected.
8. Make transducer cable connections as described in the Installation chapter of the Startup Guide.
Double-Traverse Installation (Top View)
Single-Traverse Installation (Top View)
Figure 10: Completed GCF Installations with Transducers
Note: If you have mounted the transducers into GCF properly, the two transducer cable connectors will face away
from each other as shown in Figure 10.
C-PT Ultrasonic Flow Transducer Installation Guide
29
Advertisement
Table of Contents
