Equipment Connection To Wag; Connecting To Safetran Ethernet Radio A53325; Figure 2-1. Safetran Ethernet Radio A53325 - Siemens A53457 Installation & Maintenance

INSTALLATION AND CONFIGURATION
J3A IS FOR SAFETRAN ETHERNET RADIO A53325 AND USES A SPECIAL
CABLE PROVIDED WITH THE RADIO. J3A IS NON-STANDARD AND HAS DC
POWER PRESENT ON THE CONNECTOR. USE CAUTION WHEN WIRING
TO OTHER EQUIPMENT.
3. Wire the WAG to equipment that will be used. With the exception of J3A, use standard RJ45
connectors.
2.3

EQUIPMENT CONNECTION TO WAG

There are numerous pieces of equipment that can be connected to the WAG. This section serves
as a guide for connecting various devices to the WAG.
2.3.1

Connecting to Safetran Ethernet Radio A53325

The following diagram shows the Safetran Ethernet Radio (A53325) connected to the WAG.
Document No.: COM-00-05-16
Version: C.1

Figure 2-1. Safetran Ethernet Radio A53325

2-2
CAUTION
June 2006, Revised June 2014