Siemens A53457 Installation & Maintenance page 111

Table 3-2 continued
Classification Log Entry
Warning
FLASH: ZMODEM transfer
aborted
Warning
FLASH: Bad boot code
offered
Warning
FLASH: Bad
configuration offered
Warning
FLASH: Obsolete
configuration offered
Warning
FLASH: Bad application
code offered
Informational
TEST: err <x> box <y>
time <z>
Informational
FLASH: New boot code
saved
Informational
FLASH: New
configuration saved
Informational
FLASH: ZMODEM boot
code uploaded
Informational
FLASH: ZMODEM
application code
uploaded
Informational
FLASH: ZMODEM
configuration uploaded
Document No.: COM-00-05-16
Version: C.1
Description
Means that the user either aborted an XFILES
file transfer or that the function timed out.
Indicates the XFILES command was used to
send new boot code to the WAG; however the
WAG determined the boot code was not valid
so the file was not saved.
Indicates the XFILES command was used to
send a configuration file to the WAG; however,
the WAG determined the configuration file
was not valid so the file was not saved.
Indicates that an old configuration file does
not match the new executive code so the
WAG did not save the file.
Indicates the XFILES command was used to try
to send executive code to the WAG; however,
the WAG determined the code was not WAG
executive code so the file was not saved.
Indicates that a programming error occurred.
Used by Siemens Rail Automation personnel
for troubleshooting.
Indicates the user successfully used the XFILES
command to send new boot code to the WAG.
The WAG stored the new boot code.
Indicates the user successfully used the XFILES
command to send a configuration file to the
WAG. The WAG stored the new configuration.
Indicates the existing boot code of the WAG
was successfully sent to the user's computer
using the XFILES command.
Indicates the existing executive code of the
WAG was successfully sent to the user's
computer using the XFILES command.
Indicates the existing configuration of the
WAG was successfully sent to the user's
computer using the XFILES command.
3-23
OPERATION
June 2006, Revised June 2014