Table of Contents
Advertisement
INSTALLATION AND CONFIGURATION
The user will be returned to the Second Configuration Menu.
3.
Prior to exiting the First Configuration Menu, select "Save changes then restart" to save
changes and restart the WAG.
2.6.28
Persistent Serial Tunnel
Each WAG is provided with the IP address or symbolic name of the remote WAG using the
"Persistent Serial Tunnel" configuration option. If the first byte of the IP address is configured with
0, the PST functionality is disabled.
The value defaults to DISABLED.
To change the Persistent Serial Telnet IP Address or Symbolic Name:
1.
On the Second Configuration Menu, select "Persistent Serial Tunnel" Telnet IP Address or
Symbolic Name to be changed. The Change Persistent Serial Telnet IP Address screen appears.
Figure 2-58. Change Persistent Serial Telnet IP Address Screen
2.
Do one of the following:
a. To change or enter the IP Address, select "Enter an IP address" option number and press
ENTER. Go to step 3.
b. To change or enter the Symbolic Name, select "Enter a Symbolic name" option number
and press ENTER. Go to step 4.
c. To disable the Persistent Serial Telnet function, select "Disable Persistent Serial Telnet IP
Address" option number and press ENTER. The user will be returned to the Second
Configuration Menu. Go to step 5.
d. To exit the Persistent Serial Telnet function without making changes, select "Exit without a
change" option number and press ENTER. The user will be returned to the Second
Configuration Menu. Go to step 5.
3.
From the screen in figure 2-59, do one of the following:
Document No.: COM-00-05-16
Version: C.1
2-42
June 2006, Revised June 2014
Advertisement
Table of Contents
Troubleshooting
