Module Setup - GE moisture.iq User Manual

3.9 Module Setup

The Module Setup menu (see Figure 41 below) is primarily a read-only screen. It provides detailed
information on the currently installed sensor modules.
•
The Serial Number and the current Firmware Version for the installed modules are listed at the top of
the screen.
•
Below the data boxes, the Module Letter and the Available Channels for each sensor module are listed.
•
When an external USB drive containing a sensor module firmware update file is connected to the
moisture.IQ, the Update Firmware button is enabled. To update the sensor module firmware, tap the
Module to be updated and then tap the Update Firmware button. The module firmware will be updated
and the system will reboot automatically.
•
After you have finished reading the information on this screen, tap the Return button to return to the
Settings Menu.
moisture.IQ User's Manual
Figure 41: The Module Setup Screen
Chapter 3. Using the Settings Menu
47