Sony LMT-300 Service Manual page 10

7. Remove the three screws, then remove the LMT duct
(B).
8. Remove the screw, then remove the LMT duct (A).
n
When attaching the LMT duct (A), route the power
cord through the notch.
9. Disconnect the power cord from this unit.
1-2 (E)
LMT duct (A)
Notch
Screw*
Screw*
Screws*
LMT duct (B)*
*: These parts are supplied with SRX-R320.
Power cord
LMT duct (A)*
LMT-300