Table of Contents
Advertisement
8.20.7
Current status of digital output 0, 1, 2, 3
This parameter allows you to check the current status of the digital outputs.
8.20.8
Refresh counter for process values
Measured values are calculated every 10 ms in the SIWAREX module. A counter is
incremented by 1 each time. Once the counter reaches the value 65536, it starts again from
zero. The counter can be used as a time stamp for data record DR 30.
8.20.9
Current load cell signal in mV
Display of currently measured signal voltage of the load cell(s) in mV.
SIWAREX WP231
Manual, 07/2014, A5E31238908A-02
Scale parameters and functions
8.20 DR 31 advanced current process values
119
Advertisement
Table of Contents
