Figure 48: Imagepress Server Verification Steps - Canon imagePRESS A3200 Installation And Service Manual

Verification steps
Make sure to reassemble the
imagePRESS Server. See page
connections, see page 57 and
Connect power and the dongle to the
imagePRESS Server. See page
Connect to the copier. See page
Power on the copier, and then power on the
imagePRESS Server (see page
Print the Test Page and Configuration page.
See page 49.
Connect to the network. See
Ask the network administrator to download
a test job over the network.
S P
ERVICE ROCEDURES
130. (For cable
page 58.)
36.
36.
If the imagePRESS Server does not start up, see the section on startup
51).
problems in
• If the pages do not print: verify that the copier interface cables are
securely connected and on the correct ports; see printing problems in
Table 6 on page
• If image quality is poor: test the copier (see the service documentation
that accompanies the copier).
page 40.
If the job does not print or image quality is poor: see printing problems
in
documentation. (User documentation is located on the User Documentation
CD.)
F 48: imagePRESS Server verification steps
IGURE
Troubleshooting tips
Table 6 on page 149.
149.
Table 6 on page 149 and the Troubleshooting sections of the user
131