Description Of The User Interface - Siemens Sinamics s120 Commissioning Manual
With starter
Hide thumbs
Also See for Sinamics s120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
3.3.1.2
Description of the user interface
You can use the STARTER commissioning tool to create the project. The different areas of
the user interface are used for different configuration tasks (refer to diagram below):
Image 3-1
The different areas of the STARTER user interface
No.
Operating area
①
Project navigator
②
Work area
③
Detail view
STARTER Commissioning Manual
Commissioning Manual, (IH1), 07/2016, 6SL3097-4AF00-0BP5
Description
This area displays the elements and objects that can be added to your project.
In this area you perform the tasks to create the project:
When you are configuring the drive, this area contains the Wizards that help you
•
configure the drive objects.
When you configure the parameters for the speed setpoint filter, for example.
•
When you call up the expert list, the system displays a list of all the parameters that
•
you can view or change.
This area provides detailed information on faults and alarms, for example.
Commissioning
3.3 STARTER commissioning tool
85
Advertisement
Table of Contents
