Delete Hcsm Manager - Hitachi Compute Blade 500 Series User Manual

-F
Executes the command without inquiry.
Show items
None
Message
None
Example
[Set an IP address in HCSM in order for connections to be restricted by IP
address]
$ set hcsm manager -i 192.168.0.20
Confirm? (y/[n]):y
I0001 : Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
For the management module firmware from revision A0270 or later, this
command cannot be executed by specifying the following parameters:
•
-ap <alert_port>
•
-al <alert_policy>
•
-ai <alert_retry_interval>
•
-at <alert_retry_time>
These parameters can be specified for the management module firmware
earlier than revision A0270, but do not change the set values by using the
parameters.
For details, see the explanation related to HCSM options for HCSM linkage in
the Hitachi Compute Blade 500 Series Management Module Setup Guide.

delete hcsm manager

Command
delete hcsm manager -i <hcsm_ip_addr> [-F]
Description
Deletes HCSM management server.
2-244
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide