Fan Module; Show Fan-Module Status - Hitachi Compute Blade 500 Series User Manual

based on the format check. (For more information about the format
check, see
• A maximum of three DNS servers are used in total from DNS servers for
IPv4 addresses and for IPv6 addresses. Either DNS servers for IPv4
addresses or DNS servers for IPv6 addresses are preferentially used
based on the priority setting. If three servers are used, an access attempt
will not be made to DNS servers.
If four or more DNS servers are registered, DNS servers that have the
fourth or lower priority are not used.

Fan module

show fan-module status

Command
show fan-module status [<fan_no>]
Description
Show status of the fan module.
Role
Chassis
Parameters
<fan_no>
Slot number of cooling fan module in the server chassis
Show items
-- Fan module status --
Slot
Slot number of cooling fan module in the server chassis
Range is from 0 to 5.
Install
Install status of a module
2-140
How to Specify and Display the IP Address on page
Range is from 0 to 5.
Multiple selection is available.
If 'all' is specified for this parameter or this parameter is omitted, the
command shows all fan modules.
installed : Module is installed.
not installed : Module is not installed.
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide
2-4.)