Hitachi Compute Blade 500 Series User Manual page 107

You cannot specify multiple values.
You cannot set IPMI user account number 1.
-u <account_use>
Enabled or disabled IPMI user account
enable : Enabled.
disable : Disabled.
If this is omitted, the value of the setting for enabling or disabling the
account does not change.
-n <user_name>
User name
You can enter a character string of 1 to 16 characters. The string can
contain alphanumeric characters and the following characters: . _ $ -
= + * % ? @ / \ ' ! ~ ; ^ ( ) [ ] { } | , `. You cannot use the symbols
<, >, &, #, ", or space characters.
The first character must be an alphanumeric character.
If this is omitted, the user name does not change.
If the user name is the same as the another IPMI user account, the
user name cannot be registered. If the user name is the same as the
BMC user account, the user name cannot be registered.
-p <password>
Password
You can enter a character string of 1 to 20 characters. The string can
contain alphanumeric characters and the following characters: . _ $ -
= + * % ? : @ / \ ' ! ~ ; ^ ( ) [ ] { } | , `. You cannot use the
symbols <, >, &, #, ", or space characters.
If this is omitted, the password does not change.
-l <privilege_level>
Privilege
You can select from the following privilege levels:
administrator : Administrator
operator : Operator
user : User
callback : Callback
noaccess : NO ACCESS
If this is omitted, the privilege does not change.
The initial value is NO ACCESS.
-F
Executes the command without inquiry.
Hitachi Compute Blade 500 Series CLI Console User's Guide
CLI command
2-89