Siemens SIPROTEC 5 Manual page 137

[dwfgspan-240812-01.tif, 2, en_US]
Figure 6-1
The recorder routings enable the routing of the individual measured values to the various recorders. The
following figure shows the structure of the Recorder routing V function group.
[dwrecrou-060912-01.tif, 2, en_US]
Figure 6-2
More information on the Recorder routing V function is found in the chapters
Parameters and Routing in DIGSI 5
Interface with Measuring Points
The measurands from the 3-phase voltage system are supplied via the V 3-ph interface. Depending on the
type of transformer connections, these are, for example, V
the measurands are also provided via this interface.
SIPROTEC 5, Fault Recorder, Manual
C53000-G5040-C018-5, Edition 11.2017
Structure of the Voltage 3-Phase Function Group
Structure/Embedding of the Recorder Routing V Function
and 7.6.1.2 Using Measurands
6.1 Function-Group Type Voltage 3-Phase
7.1.3 Step 2: Setting the
.
, V , V , V . All values that can be calculated from
A B C gnd
Function-Group Types
137