HP server rx4610 Service Manual page 49

Chapter 4
8121: Thermal trip failure: Processor in socket M1
8122: Thermal trip failure: Processor in socket M2
8123: Thermal trip failure: Processor in socket M3
8130: Processor in socket M0 Disabled
8131: Processor in socket M1 Disabled
8132: Processor in socket M2 Disabled
8133: Processor in socket M3 Disabled
8140: Processor in socket M0: failed FRB level 3 timer
8141: Processor in socket M1: failed FRB level 3 timer
8142: Processor in socket M2: failed FRB level 3 timer
8143: Processor in socket M3: failed FRB level 3 timer
8150: Processor in socket M0: failed initialization on last boot
8151: Processor in socket M1: failed initialization on last boot
8152: Processor in socket M2: failed initialization on last boot
8153: Processor in socket M3: failed initialization on last boot
8190: Watchdog timer failed on last boot
8191: 2:1 core to bus speed ratio: Processor L2 cache disabled
8192: L2 cache size mismatch
8193: CPUID, Processor stepping are different
8194: CPUID, Processor family are different
8195: Front side bus speed mismatch. System Halted
8196: CPUID, Processor model are different
8300: Baseboard Management Controller failed to function
8305: Hotswap Controller failed to function
84F1: Intelligent System Monitoring Forced Shutdown
84F2: Server Management Interface Failed
84F3: Baseboard Management Controller in Update Mode
84F4: Sensor Data Record Empty
84FF: System Event Log Full
8C02: ERRORS FOUND IN MEMORY SUBSYSTEM. FAILING ROWS WILL BE MAPPED
OUT ON THE NEXT RESET. IT IS STRONGLY SUGGESTED THAT YOU RESET THE
SYSTEM NOW. ALLOWING THE SYSTEM TO CONTINUE TO BOOT MAY RESULT
IN UNSTABLE SYSTEM BEHAVIOR AND/OR HARD DISK CORRUPTION.
8C51: Error in memory subsystem: Lower Board, DIMM 1
8C52: Error in memory subsystem: Lower Board, DIMM 2
8C53: Error in memory subsystem: Lower Board, DIMM 3
8C54: Error in memory subsystem: Lower Board, DIMM 4
8C55: Error in memory subsystem: Lower Board, DIMM 5
Diagnostics
41