Diagnostics Description: Post; Sel Data Tables; Hp Server Rx4610 Generator Id Codes; Sensor Codes - HP server rx4610 Service Manual

Chapter 4
Viewing the Test Log
To view the test log, use the arrow keys to highlight the View Complete Test Log option and press <Enter>.
After pressing the <Enter> key, the application displays a scrollable information box that contains the
sessions test log. It does not matter if you have tests enabled when you view the test log.
After pressing the <Enter> key, the application displays a scrollable information box that contains the
sessions test log. Because the log file is a Unicode file, you can also view it in the EFI shell by using the
"type -u" command, and in the Windows operating system using the Notepad application.
Using the View Complete Test Log option causes the system to create a file named FieldDiags.log located
at \efi\intel\service\diagnostics\efimta. When you run subsequent tests within the same diagnostic test
session the software appends information to the existing log file. The system deletes this file in preparation
for creating a new log each time you start the diagnostic application. If desired, you can save a previously
generated test log and then view it at anytime by using the type command from within the EFI Shell.
As an alternative to renaming or moving a default log file, you can use the LOG command-line option when
you invoke the diagnostic test software to create and place the generated log file.

Diagnostics Description: POST

The diagnostics (Power-On Self-Test "POST") run automatically each time the HP Server is powered on.
These diagnostics, which reside in the BIOS ROM, isolate server-related logic failures and indicate the board
or component that needs to be replaced, as indicated by the Error Messages. Most HP Server hardware
failures will be accurately isolated by the POST diagnostics.
WARNING

SEL Data Tables

The tables in this appendix provide information on the SEL viewer data on the HP Server rx4610 server
platform.

HP Server rx4610 Generator ID Codes

Generator ID
20 00
28 00
C0 00

Sensor Codes

Sensor Sensor
Type Number
00
09
14
01
You should always turn off the power and disconnect the power cord to the HP
Server before attempting to remove the cover and touch the internal components.
Failing to do so can expose you to electric shock and the server's components to
damage. The power switch does NOT turn off standby power, so disconnect the
power cord to turn off standby power.
Description
BMC
CBC
HSC
Sensor Name
Spare Sensor
Spare Sensor 1
Spare Sensor 2
Temperature
Diagnostics
35