Section 2: Installing The Video Multiplexer; Mounting; Connecting The Video Multiplexer System - Philips LTC 2622/90 Installation Instruction

LTC 2600 Series

SECTION 2: INSTALLING THE VIDEO MULTIPLEXER

2.1 Mounting

The multiplexer is supplied as a desktop unit. If desired, the unit may be rack mounted using the included rack
mount kit.

2.2 Connecting the Video Multiplexer System

1. Refer to Figures 2A, 2B, and/or 2C for details on the input/output connections supplied by the multiplexer. (Be
sure to reference the appropriate drawing for your multiplexer model.)
2. Review the typical installation diagrams provided in Appendix B at the back of the manual, and determine the
number of cameras, monitors, and VCRs to be incorporated into the system.
3. Connect all peripherals (e.g. cameras, monitors,VCRs) to the corresponding inputs/outputs on the multiplexer
rear panel.
NOTE: The Quick Reference Guide supplied with your multiplexer provides additional easy-to-follow
instructions and diagrams for completing system connections.
4. When all connections have been completed, apply power to the system.
Figure 2A: 16-channel Back Panels
Figure 2B: 6-channel Back Panels
9
Section 2 Installation