Philips LTC 2622/90 Installation Instruction page 13

LTC 2600 Series
2. Select TIME/DATE from the QUICK SETUP menu. Enter the time format (12 or 24 hours), time, date format
(dd/mm/yyyy; mm/dd/yyyy; yyyy/mm/dd), and date information as requested. (Refer to the following sample menus
which correspond to the on-screen Time/Date menus—read each row from left to right.) When you have
finished programming all time/date parameters, use the ZOOM
QUICK SETUP 3.00
SETUP 1
>TIME/DATE
AUTOSET
VCR SETUP
Choose:SELECT
Exit:ZOOM
TIME
Set system time for display
and recording
01:15:45AM
^
MOVE CURSOR: <>
Save:SELECT Exit:ZOOM
3. Select AUTOSET from the QUICK SETUP menu to automatically configure the video multiplexer for the
number of cameras connected. (See the following sample menus.) Recording, camera sequence, and video loss
list are also configured in this menu.
TIME/DATE
>AUTOSET
VCR SETUP
Choose:SELECT
4. Selecting AUTOSET ALL BELOW will automatically set the record list, sequence, and video loss list
(according to the number of camera inputs detected by the multiplexer). Selecting any of the other options in
this menu will set only the selected option.
5. When AUTOSET is completed, a message will be displayed for nine seconds. The camera inputs detected in the
setup process are displayed as shown in this sample screen. Return to the QUICK SETUP menu by pressing
the ZOOM key.
TIME/DATE
TIME FORMAT
>TIME
DATE FORMAT MM/DD/YYYY
DATE
More v
Choose:SELECT
Edit:<>
DATE FORMAT
Select Date
Edit: ^v Default:FREEZE
Save:SELECT
QUICK SETUP 3.00
SETUP 1
More^v
Exit:ZOOM
AUTOSET ALL
SETUP 1
01 02 03 04 05 06 07 -- -- -- --
-- -- -- -- -- -- -- -- -- -- -- -- -- --
the above cameras were
included inselected system
list(s)
Hit any Key to Continue
Section 3 Programming - Quick Setup
key to return to the QUICK SETUP menu.
12hr
04:57:30AM
01/01/2000
More v
Exit:ZOOM
MM/DD/YYYY
^
Edit:^v
Exit:ZOOM
AUTOSET
SETUP1
>AUTOSET ALL BELOW
RECORD LIST
VIDEO LOSS LIST
SEQUENCES
Choose:SELECT
Exit:ZOOM
14
TIME FORMAT
Set the time format to
12 hr or 24 hr clock
12 hr
^
Default:FREEZE Edit:^v
Save:SELECT Exit:ZOOM
DATE
Set system date for display
and recording 01/01/2000
^
MOVE CURSOR: <>
Edit:^v
Save:SELECT Exit:ZOOM
More^v