System4 Advanced Setup: Pc Printer Setup - Philips LTC 2622/90 Installation Instruction

LTC 2600 Series
Sequences can be set for monitor A and monitor B as shown in the sample menu.
• FULL screen display can be set for sequencing with programmable dwell time from 1 to 60 seconds. The
camera pictures can be sequenced in any order in 16 sequence steps, for example 1, 5, 8, 4, 1, 2, 3, 1, 6, 8, 1. In
this sequence, camera 1 is viewed every fourth time of the sequence.
• QUAD screen display can be set for sequencing with programmable dwell time from 1 to 60 seconds. Note
that each quadrant can be programmed to show any individual camera(s). And, the camera(s) (programmed for
each quad) can be sequenced in any order. For example, the following sequences could be set up for monitor A:
NOTE: If this feature is not programmed for a custom configuration, the factory default setting takes the
cameras in order (e.g. first quad - cameras 1,2,3,4; second quad - cameras 5,6,7,8, etc.)

5.6 System4 Advanced Setup: PC Printer Setup

(RS-232 Setup for PC/Printer/VCRs)
The System4 multiplexer has a console port which can be configured for a PC, CCL, printer, or connected to a VCR.
• PC:When connected to a PC, new software can be downloaded to the multiplexer. Additionally, the LTC 2650
Graphical User Interface software and a PC running Windows 95, 98, or NT can be used to control the
multiplexer.
• CCL:When connected to a PC, CCL commands may be used for programming and controlling the multiplexer.
• VCR:When connected to selected Philips VCRs, LTC 2601/00 or LTC 2602/00 keyboard will control primary
VCR functions (Record, Play, Stop, Fast Forward, Rewind).
• Printer:When a printer is connected, a copy of the logged events can be printed.
• Autoprint:When enabled, will automatically print log events as they occur.The print commands are not
displayed in the PC/Printer menu until the CONNECT TO parameter is set to PRINTER.
ADVANCED SETUP
SETUP 1
ALARM SETUP
CAMERA TITLES
SEQUENCES
CONFIGURE SETUPS
CONFIGURE DISPLAY
>PC/PRINTER
Choose:SELECT
CAMEO 1: 01, 05, 09, 13
CAMEO 2: 02, 06, 10, 14
CAMEO 3: 03, 07, 11, 15
CAMEO 4: 04, 08, 12, 16
SEQUENCES
SETUP 1
>SEQ DWELL B FULL 08 sec
SEQ DWELL B QUAD 08 sec
MON A FULL
MON A QUAD
MON B FULL
MON B QUAD
Choose:SELECT More v
Edit:<> Exit:ZOOM
PC/PRINTER
>CONNECT TO
SERIAL PORT
^ More v Choose:SELECT
Exit:ZOOM
Edit:<>
31
Section 5 System4 Programming
VCR
96,N,8,1
More v
Exit:ZOOM