Setting Up A Remote Connection To A Pc - GE moisture.IQ User Manual

6.8 Setting Up a Remote Connection to a PC

As a practical example of using the communications features described in the previous sections, the procedure for
connecting the moisture.IQ to a remote
1. Ensure that the
2. Refer to "Configuring the Ethernet TCP/IP Connection" on page 75, and ensure that the TCP/IP connection is
Enable
d and that the IP Address is set to
3. Refer to "Configuring a VNC Connection" on page 80, and ensure that the VNC Server is
4. Use a standard ethernet cable to connect the ethernet port on the back of the moisture.IQ to the
open the TCP/IP Setup screen and record the IP Address shown in the text box.
PC
5. From the , go to the
enter the recorded moisture.IQ IP Address when prompted (see Figure 74 below). Click the
6. A Log In screen should now be open on the moisture.IQ. Enter your
display should now be replicated on your PC monitor.
7. You can now control the moisture.IQ remotely by using your mouse to click on the display buttons. Note that
keyboard input from the PC is not accepted by the moisture.IQ.
moisture.IQ User's Guide
PC
via a Local Area Network (
PC
is properly connected to the
RealVNC
web site and download the VNC Viewer. Then, launch the VNC Viewer and
Figure 74: VNC Viewer Screen
LAN
LAN
and that the user has logged in.
Automatic
.
Chapter 6. Setting Up Communications
) is described below.
Password Log In
and . The moisture.IQ
Enabled
.
LAN
. Then,
Connect
button.
83