Chapter 5. Using the Configuration Menu
Chapter 5. Using the Configuration Menu
5.1 Configuring the Probes
After establishing the meter settings, you must configure and calibrate the attached probes. Although the probes are
physically connected to the back of the electronics unit, you must program the moisture.IQ with the type of
measurements you need the probe to make. In addition, if you want to use a constant value rather than a live input, or if
you want to apply a user function, you must program the moisture.IQ accordingly. If you do not activate the probes, or
No Probe
if you activate them incorrectly, the meter will display
or other error messages.
Configuration
Refer to the menu map in Figure 78 on page 109 and tap the
button on the main screen to open the
Configuration Menu (see Figure 52 below).
Figure 52: Configuration Menu Screen
moisture.IQ User's Guide
57