HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Procedure
Step 1 Connect the endpoint to a microphone and a stereo acoustic system.
Step 2
Choose Advanced > Settings > Audio > Audio Input. Select audio input sources.
When the VPM220 is connected to the HD-AI port on the endpoint, you do not need to set the
stereo parameter, as the VPM220 works in dual-audio-channel mode.
Step 3 Select Save to return to the Settings screen.
Step 4 On the Settings screen, choose Conference > Advanced Settings and set Audio protocol to
AAC_LD or HWA-LD. Then, set Audio channels to Two.
----End
Issue 01 (2013-09-30)
During a conference, move the microphone only when required. Otherwise, the quality of the stereo
audio heard by remote sites is affected.
All available audio input sources are selected by default.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Microphone and Speaker
69