Checking Status Indicators On The 4E1 Ports - Huawei TE40 Administrator's Manual

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
To avoid damage to the interface card, implement antistatic measures before touching the card,
such as wearing an ESD wrist strap, as shown in
Figure 3-2 Wearing an ESD wrist strap
Insert the interface card, as shown in
Figure 3-3 Inserting an interface card
Procedure
1.
2.
3.

3.2.2 Checking Status Indicators on the 4E1 Ports

The status indicators on the 4E1 ports can quickly provide information about the current
network connection.
There are two indicators on the 4E1 port to indicate the network connection, as shown in
Table
Issue 01 (2013-09-30)
Loosen the two screws and remove the cover panel of the interface card slot.
Take out the interface card from its package. Slide the interface card into the card slot
while keeping the side with components facing upwards.
Fasten the screws on the interface card.
3-8.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 3-2.
Figure 3-3.
3 Network
33