Huawei TE40 Administrator's Manual page 73

HUAWEI TE40&TE50&TE60 Videoconferencing
Endpoint
Administrator Guide
Parameter
LINE IN L (available
only for the TE50)
LINE IN R (available
only for the TE50)
PSTN
Gain
Volume indicator
Microphone array
battery level
Switch controls
Issue 01 (2013-09-30)
Description
NOTE
This parameter is available only
when you select the 2 PC IN
port of the TE60 as the DP input
source.
Adjusts the input volume of
the LINE IN port at your site.
When you adjust this input
volume, the volume heard at
remote sites is adjusted
accordingly.
Adjusts the volume of a
PSTN call at your site. When
you adjust this volume, the
volume heard at remote sites
is adjusted accordingly.
Adjusts the volume for the
MIC 1, MIC 2, RCA L, RCA
R, HDMI L, HDMI R, DP L,
DP R, LINE IN L, LINE IN
R, and PSTN ports.
Displays volume in real time.
Displays the microphone
array battery level in real
time.
 MIC array only: Your
endpoint can receive audio
signals collected by audio
input devices, excluding
the microphone array,
when you turn off the
microphone array.
 All audio inputs: Your
endpoint cannot receive
audio signals collected by
any audio input devices
when you turn off the
microphone array.
To enable your endpoint to
receive audio signals again,
perform any of the following:

Press the button on the
microphone array to
enable this function.

Press the microphone
button on the remote
control to turn on the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Microphone and Speaker
Setting
These parameters are selected
by default.
This parameter is selected by
default.
Value range: -12 dB to +12
dB
The default value is +0dB.
No default value is set for this
parameter.
No default value is set for this
parameter.
The default value is All audio
inputs.
65