Takeoff Precautions And Checks; Takeoff Procedure - Yamaha RMAX Type II G Unit Operation Manual

Takeoff Precautions and Checks

Takeoff Procedure

1 Start the takeoff operation after the outer YACS
warning lights have finished flashing, and all
lights are OFF.
2 Gradually raise the throttle stick to enable the
control to automatically increase the engine
speed.
3 Slowly move the throttle stick up to take off.
Do not operate the sticks abruptly as this
could cause the helicopter to lose balance
and lead to an accident.
TIP
G If the throttle stick is moved far up while
the outer YACS warning lights are flashing,
the engine will stop.
G Do not operate the rudder excessively
right before a takeoff, as this will cause the
tail to move abruptly in the direction of the
rudder during a takeoff.
G During takeoff, do not turn ON the GPS
control switch, as this could cause the
helicopter to not ascend straight up.
WARNING
Flying Procedure
Throttle Stick
5-8