Spray Switch - Yamaha RMAX Type II G Unit Operation Manual

Spray Switch

The sprayer can be operated when the power
switch of the flight transmitter is ON and the main
switch on the helicopter is in the START or FLIGHT
position.
Change the spray switch settings as described
below, depending on how you wish to operate the
sprayer.
Using the Flight Transmitter:
Press the (ON/OFF) spray switch on the flight
transmitter ON (pushed in) to operate the sprayer.
Press the switch again (released) to stop the
sprayer.
TIP
Pay attention to the surroundings before
pressing the spray switch ON, which will dis-
charge chemicals.
Spray Switch
ON (to operate)
Push
Power Switch
Pre-Flight Inspection Items
OFF (to stop)
Release
3-4