Installing And Removing Side Covers - Yamaha RMAX Type II G Unit Operation Manual

Installing and Removing Side Covers

How to Remove Side Covers
1 Undo the 7 rubber hooks that are located along
the top of the helicopter by lifting them towards
the left.
2 Open the side covers from side to side.
TIP
G Tilt the sprayer antenna towards the rear
before opening the right side cover.
G Make sure the side cover does not get
caught on the starter lever or the fuel tank
cap.
3 To completely remove a side cover after it is
open, hold the retaining hooks to pull the side
cover sideways and remove it from the frame.
NOTICE
Do not hold a side cover during removal, as
this could lead to damage.
How to Reinstall Side Covers
Reinstall the side covers in reverse order of
removal.
TIP
G Place the right and left side covers and
lock them in place by engaging the 7 rub-
ber hooks.
G After the right side cover is closed, return
the sprayer antenna to its original posi-
tion.
Pre-Flight Preparation and Inspection
Side Cover (right)
Side Cover (left)
Rubber hooks
Retaining Hooks
4-16