Coolant And Oil Inspections - Yamaha RMAX Type II G Unit Operation Manual

Coolant and Oil Inspections

Inspect the coolant level and check for any coolant
or oil leakage.
Before performing this inspection, turn OFF both
the main switch for the helicopter and the power
switch for the transmitter.
1 Recovery Tank
Inspect the tank cap for any coolant leakage.
Also, check the coolant level.
The standard coolant level is between the FULL
and LOW marks indicated on the recovery tank.
Coolant Preparation
Coolant: Dealer-specified coolant
Mixing ratio: Dealer-specified ratio
Coolant is toxic, therefore use caution when
handling it.
G If it enters your eye, flush it thoroughly
with water, and seek medical attention.
G If it contacts your skin or clothing,
promptly rinse with water and wash with
soap water.
G If swallowed, induce vomiting and seek
medical attention.
NOTICE
Use tap water, instead of well water or natural
water that contains sodium.
WARNING
Pre-Flight Preparation and Inspection
Recovery Tank
Cap
4-20