Siemens SINUMERIK 840C Installation Instructions Manual page 799

12 Functional Descriptions
12.6.4 Transformation parameters
Transformation parameters for 2D coordinate transformation
Parameter 1:
Parameter 2:
Parameter 4:
Parameter 10:
Y
a
2
Y
Transformation parameters for 3D coordinate transformation
Parameter 1:
Parameter 2:
Parameter 3:
Parameter 4:
Parameter 5:
Parameter 6:
Parameter 10:
12–24
More user manuals on
X shift of the real system in direction X relative to the fictitious origin
a 1 [unit: units (IS)].
Y shift of the real system in direction Y relative to the fictitious origin
a 2 [unit: units (IS)].
Angle of rotation of the real system relative to the fictitious system
-5
[unit: 10 degrees].
Axis number which is used to calculate the G96 (constant cutting
speed).
fictitious
Y
real
X
X shift of the real system in direction X relative to the fictitious
system [unit: units (IS)].
Y shift of the real system in direction Y relative to the fictitious
system [unit: units (IS)].
Z shift of the real system in direction Z relative to the fictitious
system [unit: units (IS)].
Angle of rotation , which occurs when the real coordinate system is
rotated about the X axis (unit: 10
Angle of rotation , which occurs when the real coordinate system is
rotated about the Y axis (unit: 10
Angle of rotation X, which occurs when the real coordinate system is
rotated about the Z axis (unit: 10
Axis number for axis which is used to calculate G96 (constant cutting
speed).
ManualsBase.com
a
1
-5
degrees].
-5
degrees].
-5
degrees].
© Siemens AG 1992 All Rights Reserved
12.93
X
real
X
fictitious
6FC5197- AA50
SINUMERIK 840C (IA)