01.99
12.36
12.36.1
Use the softkey function to switch the measuring system from inch to metric and vice versa.
The function "Inch/metric switchover" has two features:
1: Inch/metric switchover function
2: Metric/inch switchover function
12.36.2
•
The conversion can be configured by the user.
•
Manual readjustment of the calculated data is possible.
•
No password is required for the switchover.
•
A password is required for the conversion since the machine data dialog (MDD) must be
started.
12.36.3
When switching over the measuring system, all measurements in length will automatically be
converted into the new measuring system. This includes:
Zero offsets
Tool offsets P2-P9
Working area limitation
Dry run feedrate
Scale center
Protection zone
Position switching signals
Preset
DRF
© Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
More user manuals on
Inch/metric switchover function (as from SW 6.3)
General
Functional description
System data
ManualsBase.com
12.36 Inch/metric switchover function (as from SW 6.3)
6FC5197- AA50
12 Functional Descriptions
12–359