Siemens SINUMERIK 840C Installation Instructions Manual page 443

7 Drive Machine Data (SIMODRIVE Drive MD)
7.1.2 MSD MD (data description - SW 3)
206
Default value
0000
This machine data is provided to activate the transient recorder function with which two signals
can be recorded in a 1 ms cycle for a limited time period.
Conditions with respect to status (start, stop and trigger conditions) for the transient recorder
function must be set in machine data MD 207 to MD 218.
0: Transient recorder function deactivated
1: Transient recorder function activated
207
Default value
0000
Input of operating mode of transient recorder.
The following functions can be selected:
1H: The recording can be started immediately via MD 206 without start or stop conditions.
2H: After MD 206 has been set, the recording does not start until the start condition (MD
208, MD 209) has been fulfilled. Recording takes place without a stop condition.
4H: The recorder memories can be preset with this setting. The contents of MD 217 are
written to the recorder memories.
5H: After MD 206 has been set, the recording starts immediately until the stop condition
(MD 210, MD 211) has been fulfilled.
6H: With this setting, recording takes place with both a start and stop condition.
208
Default value
0000
Input of address for the variable which is significant for starting the recording (see also
MD 206).
209
Default value
0000
Input of threshold (value) with which the contents of the variable specified in MD 208 are
compared in order to initiate the recording (see also MD 206).
7–28
More user manuals on
Selection transient recorder
Lower input limit
0000
Setting transient recorder
Lower input limit
0000
Address for start condition
Lower input limit
0000
Threshold for start condition
Lower input limit
0000
ManualsBase.com
Upper input limit
0001
Upper input limit
0010
Upper input limit
FFFF
Upper input limit
FFFF
©
Siemens AG 1992 All Rights Reserved
12.93
Active
at once
Units
Hex
Active
at once
Units
Hex
Active
at once
Units
Hex
Active
at once
Units
Hex
6FC5197- AA50
SINUMERIK 840C (IA)