Front Brake Disc Inspection - Suzuki Liana RH413 Service Manual

3) Pull brake disc off by using 8 mm bolts (1) (2 pcs).
Installation
1) Install disc to wheel hub.
2) Install caliper assembly to steering knuckle.
3) Torque caliper carrier bolts to specification.
Tightening torque
Caliper carrier bolt (a): 85 N·m (8.5 kgf-m, 61.5
lb-ft)
4) Torque front wheel nuts to specification.
Tightening torque
Wheel nut (b): 85 N·m (8.5 kgf-m, 61.5 lb-ft)
5) Upon completion of installation, perform brake test.

Front Brake Disc Inspection

• Using magnetic stand and with dial gauge positioned
at about 10 mm (0.39 in.) inward from periphery of
disc, measure deflection of disc.
If limit value is exceeded, replace correct or replace.
Disc deflection
Limit: 0.10 mm (0.004 in.) max.
Special tool
(A): 09900–20607
(B): 09900-20701
I2RH01420025-01
• Using micrometer, measure thickness of brake disc.
If it is less than limit, replace brake disc.
Brake disc thickness
Standard: 20.0 mm (0.79 in.)
Limit: 18.0 mm (0.71 in.)
I2RH01420028-01
I2RH01420029-01
Front Brakes: 4B-7
S3RH0A4206009
I2RH01420026-01
I2RH01420027-01