Table of Contents
Advertisement
1F-9 Engine Cooling System:
2) Check high speed operation of radiator cooling fan
as follows.
a) Connect battery to fan motor coupler as shown
in figure.
b) Check that radiator cooling fan rotates smoothly
and ammeter indicates specified current.
If any abnormality is found, replace fan motor.
Fan motor specified current at 12 V
15.0 A maximum
Radiator Cooling Fan Relay Inspection
1) Disconnect negative (–) cable at battery.
2) Remove radiator cooling fan relay No.1 (1), No.2 (2)
and No.3 (3) from relay box.
3) Check that there is no continuity between terminal
"c" and "b". If there is continuity, replace relay.
4) Connect battery positive (+) terminal to terminal "b"
of relay.
Connect battery negative (–) terminal "a" of relay.
Check continuity between terminal "c" and "d".
If there is no continuity when relay is connected to
the battery, replace relay.
Radiator Cooling Fan Removal and Installation
Removal
1) Disconnect negative cable at battery.
2) Disconnect connector of cooling fan motor.
3) Remove A/C condenser cooling fan motor, if
equipped with A/C.
4) Remove radiator cooling fan motor (1) from radiator.
I3RH0A160003-01
S3RH0A1606009
Installation
Reverse removal procedure for installation.
NOTE
• Add proper coolant and check coolant
level referring to "Coolant Level Check".
• After installation, check radiator inlet hose
for leakage.
I2RH0B160010-01
S3RH0A1606010
1
I2RH0B160011-01
Advertisement
Chapters
Table of Contents
