2B-4 Front Suspension:
Front Stabilizer Bar and/or Bushings Components
1. Stabilizer bar
2. Mount bush
Front Stabilizer Bar and/or Bushings Removal
and Installation
Removal
1) Remove stabilizer joints.
When loosening joint nut, hold stud with wrench.
2) Remove stabilizer mount brackets.
3) Remove stabilizer.
3. Mount bracket
5. Joint nut
4. Joint
6. Mount bolt
Installation
1) Loosely assemble all components in reverse order of
S3RH0A2206003
removal.
2) With painted mark (1) on stabilizer bar and end face
of mount bushing (2) aligned, tighten mount bracket
bolts to specified torque.
NOTE
If painted mark has gone, align the vehicle
center and the center of stabilizer bar.
Tightening torque
Stabilizer bar mounting bracket bolt (a): 23 N·m (
2.3 kgf-m, 17.0 lb-ft)
3) Tighten joint nuts to specified torque.
When tightening, hold stud with wrench.
Tightening torque
Stabilizer joint nut (b): 50 N·m (5.0 kgf-m, 36.5
lb-ft)
I3RH0A220004-01
7. Strut assembly
: Tightening torque
S3RH0A2206002
I4RH01220002-01