Operation - Bosch MSM8 series Operating Instructions Manual

MSM8-Zubehör_de-ar.book Seite 12 Donnerstag, 18. Dezember 2014 9:02 09
en
, Explanation of the symbols on the appliance or accessory
Caution! Rotating tools.
Do not place fingers in the feed tube.
Do not clean the lid of the multi-function accessory
in the dishwasher.
Never immerse the lid of the multifunction accessory
in liquids and do not wash under running water.
Place lid on the bowl of the multi-function accessory ( )
and lock ( ).
Insert dicer into the lid ( ) and lock ( ).
Before use, read these instructions carefully in
order to become familiar with important safety
and operating instructions for this appliance.
Please keep the operating instructions in a safe
place.
If passing on the appliance to a third party,
always include the operating instructions.
Universal cutter L
Please fold out the illustrated pages.
Fig. 
1 Universal cutter L/XL
2 Blade
3 Attachment
4 Lid
5 Ice-crusher-blade (for size L only) *
*
For some models.
With the universal cutter XL use the appliance
at full power when preparing honey spread
(for the recipe, see separate Instructions
for Use for this accessory).
A universal cutter can be ordered from
customer service (order no. 753122).

Operation

The universal cutter is suitable for cutting meat,
hard cheese, onions, herbs, garlic, fruit,
vegetables, nuts, almonds.
Always observe the maximum quantities
and processing times in the table (Fig. ).
You can crush ice with the ice crusher blade.
Optimum processing quantity: 4–6 ice cubes.
12
The blade is sharp and
can cause injury!
Never grip the blade in the universal cutter.
Take hold of the universal cutter blade
by the plastic handle only.
Do not touch blade of the universal cutter
with bare hands. Clean them with a brush.
Warning!
The universal cutter must be completely
assembled before use!
Caution!
Before cutting meat, remove gristle, bones and
sinews. The universal cutter is not suitable for
cutting very hard items (coffee beans, radishes,
nutmeg) and frozen food (fruit, etc.).
Fig. 
Place the universal cutter on a smooth,

clean work surface and press.
Insert the blade.

Add food.

Warning!
Blade must sit straight in the universal cutter so
that the attachment sits correctly (Fig. =
Place the attachment on the universal

cutter and rotate in a clockwise direction
until it "clicks" into position.
Place the base unit on the attachment

and lock into position.
Insert the mains plug.

Robert Bosch Hausgeräte GmbH
-3).
