Call Park - Panasonic KX-TAW848 Features Manual

1.12 Holding Features
Mode 1
Mode 2
(Default)
Mode 3
Mode 4
If one of the following occurs frequently with an SLT, choose "Mode 2", "Mode 3", or "Mode
4":
If a call is not terminated after going on-hook, the above cases occur. To avoid these
problems, choose "Mode 2", "Mode 3", or "Mode 4". Every call will be terminated unless
the Hold feature number is entered after flashing the hookswitch in Mode 2, Mode 3, and
Mode 4.
• Hold Alarm tone pattern has a default (
User Manual References
User Manual
1.4.2 Call Hold

1.12.2 Call Park

Description
An extension user can place a call into a common parking zone of the PBX. The Call Park
feature can be used as a transferring feature; this releases the user from the parked call to
perform other operations. A parked call can be retrieved by any extension user.
92 Feature Guide
Hold
Flashing the hookswitch
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
Flashing the hookswitch
+
Hold Feature No.
+
Going on-hook
a)
When an SLT user answers a call, a reorder tone is heard or no one is heard on
the other end.
b)
When an SLT user goes off-hook, a reorder tone is heard instead of a dial tone.
Transfer to CO Line
Flashing the hookswitch
+
CO Line Access No.
Flashing the hookswitch
+
CO Line Access No.
Flashing the hookswitch
+
Hold Feature No.
+
CO Line Access No.
Flashing the hookswitch
+
Hold Feature No.
+
CO Line Access No.
5.2.1 Tones/Ring Tones).
Transfer to Extension
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Extension No.
Flashing the hookswitch
+
Hold Feature No.
+
Extension No.