4.8 ARS [8]
4.8
ARS [8]
4.8.1
System Setting [8-1]
Automatic Route Selection (ARS) automatically selects the appropriate carrier at the time a CO
line call is made, according to the programmed settings. The user-dialed number will be
checked and modified in order to connect it to the appropriate carrier.
ARS Mode
Selects the condition to determine when to operate ARS.
Default
Value Range
Feature Guide References
Feature References
•
•
Programming References
•
Mode When Any Carrier is not Programmed for the Dial
Selects what happens when the dialed number is not found in Leading Number in Leading
Number [8-2].
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
4.8.2
Leading Number [8-2]
Specifies the area codes and/or telephone numbers as leading numbers that will be routed by
the ARS feature. A maximum of 1000 different leading numbers can be programmed, and each
leading number can select a Routing Plan Table number, which determines the ARS
446
Feature Guide
Off
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension
user makes a call using Idle Line Access method.
On for Any CO Access Operation: ARS operates when an
extension user makes a call using Idle Line Access, CO Line
Access, or S-CO Line Access method.
1.5.5.3 CO Line Access
1.9.1 Automatic Route Selection (ARS)
None
Local Access
Disconnect: the line will be disconnected.
Local Access: the dialed number will be handled by Idle Line
Access method.
1.9.1 Automatic Route Selection (ARS)
None