Panasonic KX-TAW848 Features Manual page 238

4.1 Configuration [1]
SLT Flash Detection
Enables the PBX to detect a flash signal an SLT user sent by pressing the hookswitch or the
Flash/Recall button.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Flash Timing - Min.
Specifies the minimum time before the PBX starts recognizing a hookswitch flash signal sent
from an SLT.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Flash Timing - Range
Specifies the length of time required by the PBX to recognize a hookswitch flash signal sent
from an SLT.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
DTMF-R STD Detection Time
Specifies the minimum time required by the PBX to detect the DTMF tone.
Default
Value Range
238 Feature Guide
Enable
Disable: The PBX disconnects the line to prevent placing the call on
hold.
Enable: The PBX places the call on consultation hold.
None
4.1.1 Slot [1-1]
112 ms
8 × n (n=3–63) ms
None
4.1.1 Slot [1-1]
904 ms
8 × n (n=3–191) ms
None
4.1.1 Slot [1-1]
30 ms
2 × n (n=1–31) ms