4.1.6
Slot [1-1] Card Command
Commands for the service cards can be programmed.
INS
Puts the card in service.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
OUS
Takes the card out of service. This enables a temporal non-use of the card, for example, for the
purpose of repair.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Pre-INS
Assigns the card type to a certain sub-slot (Pre-installation).
Default
Value Range
Installation Manual References
•
Not applicable.
Not applicable.
None
4.1.1 Slot [1-1]
Not applicable.
Not applicable.
None
4.1.1 Slot [1-1]
Not applicable.
Card Type:
HLC4: 4-Port Hybrid Extension Card
PLC8: 8-Port Proprietary Extension Card
PLC4: 4-Port Proprietary Extension Card
SLC8: 8-Port Single Line Telephone Extension Card
LCOT4: 4-Port Analog Trunk Card
MSG2: 2-Channel Message Card
DPH4: 4-Port Doorphone Card
ECHO8: 8-Channel Echo Canceller Card
EXT-CID: Extension Caller ID Card
1.3.1 Options
4.1 Configuration [1]
Feature Guide
247