Intercept Routing - Panasonic KX-TDA100 Features Manual

Intercept Routing

Description
Provides automatic redirection of incoming trunk calls. There are two types of Intercept
Routing as follows:
Feature
Intercept Routing—No
Answer (IRNA)
Intercept Routing—
Busy/DND
The available intercept destination is as follows:
Type 1: The destination assigned on the extension port which the original destination joins.
(
Type 2: The destination assigned on the trunk group which receives the call.
(
Original Destination
Wired Extension (PT/SLT/ISDN
Extension/T1-OPX)
Digital Wireless Extension (DWX)
Incoming Call Distribution Group
DWX Ring Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analogue/ISDN Remote
Maintenance
Idle Trunk Access no. + Phone no.
Trunk Group Access no. + Phone no. Not available
Other PBX Extension (TIE with no
PBX Code)
Other PBX Extension (TIE with PBX
Code)
If a called party does not answer a call within a preprogrammed
time period (Intercept time) (
to the preprogrammed destination.
If a called party is busy or in DND mode, the call is redirected to
the preprogrammed destination.
Extension Intercept Destination)
Trunk Group Intercept Destination)
Description
Intercept Time), it is redirected
The Available Intercept Destination
Type 1
Type 1
Intercept Routing—Overflow in an Incoming Call
Distribution Group works (
Section 1.2.2 Incoming Call Distribution Group
Features—SUMMARY). The overflow destination
is assigned on the incoming call distribution group
which the original destination joins (
Destination on Time Out).
Type 2
Type 2
Type 2
Type 2*
Type 2
Not available
Type 2
Not available
1.1 Incoming Call Features
Overflow Feature in
Overflow
Feature Guide 27