2.3 System Data Control
2.3.2 PT Programming
Description
A PT user can perform the following programming:
a)
b)
c)
Conditions
•
COS programming determines what programming can be performed (
Mode Level):
a)
b)
c)
•
The extension which is connected to the lowest numbered extension port can perform
both personal programming and system programming regardless of the COS.
•
The extension(s) assigned as the manager COS can perform manager programming.
•
During programming, the PT is considered to be busy.
•
Access to system programming and manager programming is allowed only one at a time.
However, one PBX supports up to 16 simultaneous programmers (one system
programmer + 15 personal programmers, one manager programmer + 15 personal
programmers, or 16 personal programmers).
•
System Programming Password Level
To access system programming, a valid password must be entered. There are two types
of passwords, each of which is factory preprogrammed (default) and can be changed.
Dealer Password
User Password
•
Personal Programming Data Default Set
A user can return all of the items programmed on the telephone to default.
258
Feature Guide
Personal Programming: Customising the extension according to his needs.
System Programming: Customising the PBX according to organisational needs.
Manager Programming: Customising specified frequently changing items (e.g.,
Charge Management and Remote Extension Lock).
System programming and personal programming
Personal programming only
No programming
Type
All system programming available for PT programming is
accessible (
Permitted system programming is accessible (
Password for User). Each access to system programming can
be controlled.
Description
System Password for Dealer).
Programming
System