Panasonic KX-TDA100 Features Manual page 312

3.2 PC Programming
Common–E1 MFC-R2 Setting 1
Parameter
Slot
ANI (Automatic Number Identification) Service
Mode
ANI Max. digits
MFC-R2 Time
Forward
Backward
Disappearance
Group-I Code Assignment
ANI Start
ANI Complete (1–4)
ANI Reject
End of Digit
End of Digit Sending
Timer
Group-II Code Assignment
Group-II Code
Outgoing Call
Group-II Code
Incoming Call (1–15)
Group-II ANI
312 Feature Guide
Description
Specifies the slot no.
Used to control the ANI service. When
utilising the ANI service, one of three
presentation methods (incoming Trunk
calls only/outgoing Trunk calls only/both)
can be selected.
Specifies the maximum digits of the ANI
number the system can receive.
Specifies the maximum waiting time for the
MFC-R2 Forward signal from the telephone
company.
Specifies the maximum waiting time for the
MFC-R2 Backward signal from the
telephone company.
Specifies the maximum waiting time for the
MFC-R2 Disappearance signal from the
telephone company.
Specifies the code which indicates the start
of the ANI number.
Specifies the code which indicates the end
of the ANI number.
Specifies the code used to reject the ANI
number.
Specifies the confirmation of the end of the
ANI number.
Specifies the duration time to send the end
of the ANI number.
Specifies the destination of each Group-II
Code transmitted to the telephone
company.
Specifies the destination of incoming Trunk
calls for each Group-II Code respectively.
Specifies the Group-II ANI code
Value Range
PBX No.–Slot No.
(Card type is only E1.)
None/
Incoming call only/
Outgoing call only/
Both Incoming and
Outgoing calls
None/1–16
1–30 s
1–30 s
1–30 s
Undefined/1–15
Undefined/1–15
ANI Complete (1) is 1–
15
1–15
Undefined/1–15
Undefined/1–15
1–15
Undefined/Subscriber/
Operator/Collect Call
1–15