Panasonic KX-TDA100 Features Manual page 288

3.2 PC Programming
Configuration–Slot–BRI
Common
Parameter
Slot
BRI ISDN Time
Protocol Timer
Parameter
ISDN line/
QSIG
Master/
QSIG
Slave
288 Feature Guide
Specifies the slot no.
Specifies the length of time for the ISDN
protocol.
T200 Specifies the maximum waiting time after
sending the L2 command to the ISDN,
before expecting the reply to it.
T202 Specifies the maximum waiting time after
resending the TEI request to the ISDN,
before expecting the reply to it.
T203 Specifies the maximum time to detect no
communication status of L2.
T301 Specifies the maximum waiting time after
making a call to the ISDN, before expecting
the reply to it.
T302 Specifies the maximum time allowed
between each digit on an incoming call.
Applies to the overlap dialling.
T303 Specifies the maximum waiting time after
sending the Setup message to the ISDN,
before expecting the reply to it.
T304 Specifies the maximum time allowed
between each digit on an outgoing call.
Applies to the overlap dialling.
T305 Specifies the maximum waiting time after
sending the DISC message to the ISDN,
before expecting the reply to it.
Description
Description
Value Range
PBX No.–Slot No.
(Card type is only BRI.)
Please refer to the next
Protocol Timer.
Value Range
*0–600 s
*0–600 s
*0–600 s
*0–18000 s
*0–600 s
*0–600 s
*0–3000 s
*0–3000 s