Intercept Routing - Panasonic KX-NS1000 Feature Manual

UM Group
VM Group (DTMF/DPT)
Fax Unit
External Pager (TAFAS)
DISA
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)
5.

Intercept Routing

After a call has been directed to its DIL, DID, or CLI destination, the following Intercept Routing features,
if programmed, can redirect the call.
Type
No Answer (IRNA)
Busy
DND
No Destination
PC Programming Manual References
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL—
10.1.12 Intercept Routing
Description
Redirects an incoming CO line call or intercom call to a preprogrammed destination when the original
destination does not, or cannot, answer the call. There are four types of Intercept Routing, described below.
Document Version 2016-03
Destination Type
Description
If a called party does not answer a call within a
preprogrammed time period (Intercept time), the
call is redirected to a preprogrammed destination.
If a called party is already handling another call,
the new call is redirected to a preprogrammed
destination.
If a called party is in Do Not Disturb (DND) mode,
the call is redirected to a preprogrammed
destination.
If a destination is not assigned, the call is
redirected to an operator.
10.1.12 Intercept Routing
Availability
ü
ü
ü
ü
ü
ü
Details in
®
10.1.12 Intercept
Routing
®
10.1.13 Intercept
Routing—No
Destination
Trunk Property
Feature Manual 201