Panasonic KX-TDA100 Features Manual page 52

1.2 Receiving Group Features
• If a G-DN button is assigned, it also shows the log-in/log-out status of the corresponding
group. The light pattern is the same as the Log-in/Log-out button which includes the group
number.
• Wrap-up Button
A flexible button can be customised as the Wrap-up button. It shows the current status as
follows:
Slow red flashing
Red on
Off
• Automatic Log-out
A member extension may be logged-out automatically, if the Unanswered time expires a
preprogrammed number of times consecutively. The number of consecutive unanswered
calls can be assigned for each incoming call distribution group. If the extension is a
member of more than one incoming call distribution group, the unanswered number is
counted across all corresponding incoming call distribution groups. It is possible to return
to the log-in mode manually.
• Log-in/Log-out Monitor
The supervisor extension can monitor and control the log-in/log-out status of the incoming
call distribution group members. (
Distribution Group Features—SUMMARY)
• Log-in/Log-out Information on SMDR
Log-in/Log-out information can be printed out on SMDR. (
52 Feature Guide
Parameter
Used to log-in or log-out from all incoming
(All)
call distribution groups to which you
belong.
Light pattern
Wrap-up
Not Ready
Ready (Wrap-up mode cancel)
Usage
Status
Supervisory Feature in Section 1.2.2 Incoming Call
Light Pattern
Red on Off
After Log- After Log-
out in
Operation Operation
1.23.1 SMDR)